• 電子計測機器、制御システムでお困りのことがあればご相談ください。

    = Products information =

    Extension unit: Convert TTL parallel signals with relay contacts and isolators.

    LED indicator: Status display of equipment, counter, 4 digit BCD / HEX indicator.

    Model:ZS-7211P-XYZ

    Independent make contact output. When the power is turned on, there is a circuit that isolates the coil voltage while the input level is indeterminate (about 100 ms).

    Since a pull-up resistor is added to the input side, it can correspond also to the open connector output. The relay drive signal can be directly connected with our company’s GP-IB adapter series; ZS-6120CP etc.

    [ Data Sheet ]

     

    [ User’s Manual ]

    Model:ZS-7220P-XY

    Models that correspond to various voltages are available. Amphenol 57-40500 or 50 pin connector for flat cable can be selected for connection with external equipment. The output signal can be easily connected with our GP – IB adapter series; ZS – 6120CP etc., it can isolate the control signal with the computer and create a noise resistant system. 8-bit control signal is provided for freely assigning input and output.

    [ Data Sheet ]

     

    [ User’s Manual ]

    Model:ZS-6720D

    4 digit parallel input / digit serial input selection.

    BCD / HEX input positive / negative logic selection.

    Latch input positive / negative logic selection.

    Supply voltage input range is wide (DC 4 V to DC 18 V).

    [ Data Sheet ]

     

    [ User’s Manual ]

    Inquires About Products >>