• 電子計測機器、制御システムでお困りのことがあればご相談ください。

    = Products Information =

    It is possible to control the connected equipment by converting to a digital parallel signal via the USB interface.

    Model:ZS-6204E

    MOS relay output and photocoupler input are built-in, it is a compact, low cost USB adapter that can be easily controlled from a personal computer. Relay output 2 contacts. Photocoupler input 2 bits.

    [ Data Sheet ]

     

    [ User’s Manual ]

     

    [ Driver ]

    Model:ZS-6216E

    MOS relay output and photocoupler input are built-in, it is a compact, low cost USB adapter that can be easily controlled from a personal computer.
    Photo MOS relay output 8 contacts, Photocoupler input 8 contact, cable is optional.

    [ Data Sheet ]

     

    [ User’s Manual ]

     

    [ Driver ]

    Model:ZS-6220

    It is easy to connect with a PC. It is possible to easily add multiple units using HUB.

    You can assign inputs and outputs in bytes (8 bits).

    For data code, BCD or HEX can be selected in units of 4 bits. Output can be set in byte units or bit units.

    Besides data, control lines such as strobe and trigger are prepared.

    The following settings can be made with the DIP switch.

    ◎ I / O assignment ◎ Select data code. ◎ positive / negative logic of input / output data.

    ◎ positive / negative logic of control signal.

    [ Data Sheet ]

     

    [ User’s Manual ]

     

    [ Driver ]

    Model:ZS-6222

    Complies with USB 2.0 standard, full speed. Power supply (+ 5V) is supplied from USB. DIO 32 bits. Input and output can be selected in byte units. The DIO interface has a margin in the output drive 74AC245 is used. The setting of the operation mode is performed by command.

    [ Data Sheet ]

     

    [ User’s Manual ]

     

    [ Driver ]

    Model:ZS-6224

    USB 2.0 compliant, full speed. Power supply (+ 5V) supplied from USB.

    Relay output 4 contacts. Photocoupler input 4 bits. Small size (about 110 x 80 x 30 mm).

    [ Data Sheet ]

     

    [ User’s Manual ]

     

    [ Driver ]

     

    [ Sample for multipule usage ]

     

    [ Lab View ]

    Model:ZS-6225

    USB 2.0 compliant, full speed. Power supply (+ 5V) supplied from USB.

    Photo MOS relay output 4 circuits. Photocoupler input 4 bits.

    [ Data Sheet ]

     

    [ User’s Manual ]

     

    [ Driver ]

     

    [ Sample for multipule usage ]

     

    [ Lab View ]

    Model:ZS-6228

    USB 2.0 compliant, full speed. Power supply (+ 5V) supplied from USB.

    8 transfer relay outputs; ZS-622P / S-8M.

    8 Photomos Relay outputs; ZS-6228P / S-8R.

    8 photocoupler inputs: ZS-6228P / S-8N.

    [ Data Sheet ]

     

    [ User’s Manual ZS-6228P/S-8R ]

     

    [ User’s Manual ZS-6228P/S-8M ]

     

    [ User’s Manual ZS-6228P/S-8N ]

     

    [ Driver ]

     

    [ Sample for multiple usage ]

     

    [ Lab View ]

    Inquires About Products >>